The following updates were made to the A08 BIOS to create A09: Issues Fixed: 1. Win2K/WinME: Fixed issue in which the system may not resume to the correct display (CRT or LCD) after resume from hibernate. 2. Win2K: Fixed issue in which the OS fails to recognize the dock if the system is docked while in hibernate. 3. Win2K/WinME: Fixed issue in which the system would intermittently fail to fully resume from Standby until a key was pressed. 4. Fixed issue in which a device swapped into the system modular bay may not be detected. 5. WinME: Fixed issue in which devices in the dock media bay may not function after resume from suspend. 6. Prevent system from suspending if a video card is installed in the dock and the system's lid is closed. 7. Fixed issue in which the system fails to report the correct dock status when docked to a C/Port or C/Port II when the Docking Ethernet is disabled in System Setup. 8. Fixed issue in which the system fails to recognize a modular bay IDE device if the primary hard drive is removed. 9. Fixed problem in which IR and serial port communications fail when used simultaneously. 10. Win98: Improved screen flashes seen after recovering from suspend or toggling in and out of System Setup. 11. Fixed problem in which the system intermittently fails to boot from CD-ROM. 12. Fixed issue in which the system fails to direct the video to some CRTs when the system's lid is closed. 13. Fixed problem seen when charging some batteries. Enhancements: 1. Display BIOS copyright message at the bottom of the first page of System Setup. 2. Set USB Legacy to 'Enabled' by default in System Setup.
Скачать